Categories
blog

Roof Install Tips For Beginners

Whether you are having a new roof installed or if you are restoring an existing roof, the installation process is almost always the same. The main difference between a new roof and an old one is that with a new roof you will probably be dealing with different types of roofing materials than you would if you were replacing a roof. When you are doing a roofing repair, you can skip this part and go straight to attic insulation. Either way you will need to get down on your hands and knees and cut all of the way around the perimeter of the roof.

New roof install process

Next, you will need to measure everything so you know what you are going to need, including any trim for the roof, baseboards and other elements of the roof system. You should take note of all the details of the roof, including any rafters or other parts that may be exposed. This will help you with the installation, as well as helping the contractor to estimate how much materials he will need. It is important to note the spacing between the rafters. If the spacing is too large, it will create gaps that the roofing shingles cannot fill, which will allow water to get inside and damage the roof. If the spacing is too small, the roofing shingles may not be able to cover the space, and a leak might occur.

Once you have marked all of the areas where you will be installing the roofing materials, you should set up the tools that you will need for the job. Typically, you should have a tape measure, screwdriver in hand, a bucket to catch the leaking materials and roofing sheets to remove once the job is done. While this sounds like a lot, it is actually a relatively simple task when you are done. Most professionals are used to performing the roofing installation and often make it a quick and easy process.

One thing you want to keep in mind is the difference between roofing tar and roofing shingles. Tar is typically used on older roofs to protect them from the elements. The roofing materials of tar are more fragile than the shingles. As such, they cannot be installed over tar roofs.

When you decide to hire a professional roofer to install your new roof, it is a good idea to make sure that he has the right tools for the job. Not only do you want to ensure that he has the correct tools, but also that he uses the right roofing materials. For instance, if you decide to use slate tiles, you want to make sure that the roofer has the proper roofing materials for roofing slate. This way you can ensure that the tiles will not crack or break.

The roof install process is not difficult to complete. In fact, you can complete the roofing project yourself in a weekend if you wanted. The key is to prepare your roof properly before beginning the installation. If you follow these tips, you can have the roof you have always dreamed of built in no time.