Categories
blog

A Guide to the Roofing Install Process

New roof install process

A Guide to the Roofing Install Process

A new roof installation is a major investment for any homeowner. This is not only due to the fact that a roof provides protection from rain, sun, snow and other weather-related issues but also because a roof directly affects the resale value of a property. As such, every homeowner should ensure that they get their hands on the best roofing services possible. In this article, I will explain how a roofing company can improve the quality of your roof at an affordable rate.

Roofing begins with the installation of the roof. Many homeowners think that they will have to build the roof from scratch which could take months or even years. A better alternative is to purchase an existing roof from a professional roofer so that you can skip the steep cost of building the roof. Once the roof has been purchased, it becomes much easier to install the roofing shingles since they already have been fitted and arranged to perfection. You just need to measure the location of where you would like to place the shingles and give the roofing installer the proper instructions on how to do so.

After the roofing is installed, you can proceed to installing the flashing around the edges of the roof. This can be tricky because some flashing kits come with a seam running across the bottom edge of each shingle. Since you can’t install flashing through the entire length of the roof, you will have to cut it along the seams. The use of a power washer is recommended for this job since it won’t damage the shingles.

Once the flashing is in place, you can go ahead and install the top layer of the roofing. The thickness of the top layer is based on the manufacturer’s recommendation, which can vary depending on the roof you have bought. Once you are done, you can proceed to cover the remaining space left between the first and second shingles by using rubber felt pads or padding. The purpose of doing so is to create a waterproof layer to keep water away from the attic.

Once everything is in place, your roofing install professional should test the roof to ensure there are no gaps or leaks. He or she will also check the valleys in the roof for cracks. If these problems are found, your roofing contractor should tell you before you start the roofing install process. Your contractor can also advise you on the best way to prepare your home for the weather, which includes removing rain gutters and sealing any cracks or valleys.

While the roofing install process is a do-it-yourself project, it isn’t something you should tackle alone. Before you start, make sure you understand the basic steps of roof installation. You don’t want to end up with a poorly installed roof that will cost you a lot of time and money in the future. The easiest way to learn the basic process is through online tutorials or by hiring a roofing professional. Make sure you choose someone who has the proper training for your job.